Cone crusher
Cone crusher is suitable for metallurgy, construction, road construction, chemical and silicate industry of raw materials crushing, can be broken medium and medium hardness above all kinds of ores and rocks. Compared with other crushing machinery, cone crusher has the advantages of high crushing efficiency, low energy consumption, uniform product size and so on.
Working principle
When working, the motor rotates through the belt pulley or coupling, the cone crusher drive shaft and the cone of the cone crusher are forced to rotate around a fixed point under the eccentric sleeve. Thus, the crushing wall of the crushing cone is sometimes close to and sometimes away from the surface of the mortar wall fixed on the adjusting sleeve, so that the ore is constantly impacted, squeezed and bent in the crushing chamber to achieve the crushing of the ore.
Other instructions
High performance and low cost
The combination of optimized cavity type, reasonable speed and stroke has stable and reliable performance, improved production capacity and reduced production cost. By using the principle of lamination crushing, the cubic finished products are increased, the particle size is uniform, and the grading is reasonable.
Safe and reliable operation
The large diameter spindle and heavy main frame ensure that the equipment is durable and reliable. Multi-point controlled independent thin oil lubrication system ensures double protection of bearing lubrication. Over-iron protection device and automatic control system can realize automatic safety protection
Easy to operate and maintain
All components can be removed from the top or side to facilitate the removal of fixed and moving cone assemblies. The hydraulic cavity cleaning system can quickly clean the broken cavity, greatly reducing downtime.
The technical parameter data is only for reference, and the actual design depends on customer requirements.
| specification |
Model number |
Big end diameter of crushing cone
(mm) |
Maximum feed size
(mm) |
Width of discharge port
(mm) |
Processing capacity
(t/h) |
Motor power
(kw) |
Total weight (t) |
| Φ 600 |
PYB600 |
600 |
65 |
12-25 |
40 |
30 |
5 |
| PYD600 |
35 |
3-13 |
12-23 |
5.5 |
| Φ 900 |
PYB900 |
900 |
115 |
15 to 50 |
50-90. |
55 |
11.2 |
| PYZ900 |
60 |
5-20 |
20-65. |
11.2 |
| PYD900 |
50 |
3-13 |
15 to 50 |
11.3 |
| Φ 1200 |
PYB1200 |
1200 |
145 |
20 to 50 |
110-168. |
110 |
24.7 |
| PYZ1200 |
100 |
8-25 |
42-135. |
25 |
| PYD1200 |
50 |
3-15 |
18-105. |
25.3 |
| Φ 1750 |
PYB1750 |
1750 |
215 |
25 to 50 |
280-480. |
160 |
50.3 |
| PYZ1750 |
185 |
10 to 30 |
115-320. |
50.3 |
| PYD1750 |
85 |
5-13 |
75-230. |
50.2 |
| Φ 2200 |
PYB2200 |
2200 |
300 |
30 to 60 |
59-1000. |
280-260. |
80 |
| PYZ2200 |
230 |
10 to 30 |
200-580. |
80 |
| PYD2200 |
100 |
5-15 |
120-340. |
81.4 |
